Difference between revisions of "Description of Mic Models"

From Fractal Audio Wiki
Jump to navigation Jump to search
 
(30 intermediate revisions by 4 users not shown)
Line 1: Line 1:
The following Mic Models are available in the Axe FX
+
The following mic models are available in the Axe-Fx. You can also find a list on the [http://www.fractalaudio.com/axe-fx-guitar-amps.html Fractal Audio website].
 +
<br>
 +
<table width="879" border="1">
 +
  <tr>
 +
    <td width="194"><strong>Axe-FX Mic Type </strong></td>
 +
    <td width="669"><strong>Description</strong></td>
 +
  </tr>
 +
  <tr>
 +
    <td width="194">None (**This is now the default since v. 4.00) </td>
 +
    <td width="669">Disables mic post processing</td>
 +
  </tr>
 +
  <tr>
 +
    <td width="194" valign="top">57 DYN </td>
 +
    <td width="669"><p>What can you say about the '''Shure SM57''' It is a tool found in the workbench of  every sound engineer, both for live and studio applications. There's simply no  question: it's a "must-have" mic. <BR>
 +
<BR>
 +
The SM57 is a cardiod (unidirectional)  dynamic microphone with a contoured frequency response of 40 to 15,000 Hz,  perfect for clean reproduction of vocals and instruments. But the SM57 is most  renowned in the music industry as the standard microphone of choice for snare  drums and guitar amplifiers. Go to any stage or studio and you're likely to find  SM57s pointing at the amps and snare. <BR>
 +
<BR>
 +
By the way, the '57 has been  proudly standing on the podium of the US President for over 30 years, so you can  add patriotism to its outstanding attributes! This mic is also known to take a  beating and come back for more, so tell your roadie Rocco to have a ball! Its  outstanding performance, legendary reliability, and diversity of application  make this "workhorse" the choice of performers, producers, and sound engineers  the world over. </p>
 +
<p><BR>Technical Info <BR>Type: Dynamic <BR>Frequency Response:  40 to 15,000 Hz (see Figure 2) <BR>Polar Pattern: Unidirectional (cardioid),  rotationally symmetrical about <BR>microphone axis, uniform with frequency 3-pin  professional audio connector (male XLR type) <BR>Case: Dark gray,  enamel-painted, die-cast steel with a polycarbonate <BR>grille and a stainless  steel screen. <BR>Dimensions: 32 x 157 x 23mm (1-1/4 x 6-3/16 x 29/32 in.) <BR>
 +
Swivel Adapter: Positive-action, break-resistant, adjustable through  180&amp;#65533;, <BR>
 +
with standard 5/8 in.-27 thread <BR>
 +
Net Weight (without  cable): 284 g (10 oz.) <BR>
 +
    Furnished Accessories: Swivel Adapter, Storage  Bag</p></td>
 +
  </tr>
 +
  <tr>
 +
    <td width="194" valign="top">58 DYN </td>
 +
    <td width="669">The '''Shure SM58®''' unidirectional (cardioid) dynamic vocal microphone is designed for professional vocal use in live performance, sound reinforcement,
 +
and studio recording. It has a tailored vocal response for a sound which is a world standard for singing or speech. A highly effective, built-in spherical filter minimizes wind and breath "pop" noise. A cardioid pickup pattern isolates the main sound source while minimizing unwanted background noise.
 +
<BR><BR>
 +
Rugged construction, a proven shock-mount system, and a steel mesh grille ensure that even with rough handling, the SM58 will perform consistently,
 +
outdoors or indoors.
 +
<BR><BR>
 +
Type: Dynamic (moving coil)
 +
<BR>
 +
Frequency Response: 50 to 15,000 Hz
 +
<BR>
 +
Polar Pattern: Unidirectional (cardioid), rotationally symmetrical about microphone axis, uniform with frequency
 +
<BR>
 +
Sensitivity (at 1,000 Hz Open Circuit Voltage): -54.5 dBV/Pa (1.85 mV) 1 Pa = 94 dB SPL
 +
<BR>
 +
Impedance: Rated impedance is 150 ohms (300 ohms actual) for connection to microphone inputs rated low impedance
 +
<BR>
 +
Polarity: Positive pressure on diaphragm produces positive voltage on pin 2 with respect to pin 3
 +
<BR>
 +
Connector: Three-pin professional audio connector (male XLR type)
 +
<BR>
 +
Case: Dark gray, enamel-painted, die cast metal; matte-finished, silver, spherical steel mesh grille
 +
<BR>
 +
Net Weight: 298 grams (10.5 oz)
 +
</td>
 +
  </tr>
 +
  <tr>
 +
    <td width="194" valign="top">421 DYN </td>
 +
    <td width="669"><p>The '''Sennheiser MD 421''' is one of the most recognized microphones in the world. Its excellent  sound qualities enable it to cope with the most diverse recording conditions and  broadcasting applications. The 5-position bass control enhances its "all-round"  qualities. <BR>
 +
Features <BR>
 +
Rugged professional microphone <BR>
 +
5-position bass roll-off switch <BR>
 +
Effective feedback rejection <BR>
 +
Clear sound reproduction <BR>
 +
Easy handling due to pronounced  directivity <BR>
 +
Includes microphone clamp for 3/8 in. thread </p>
 +
<p><BR>
 +
Technical  Info <BR>
 +
Pick-up pattern: cardioid <BR>
 +
Frequency response: 30 - 17,000 Hz <BR>
 +
Sensitivity: (free field, no load) (1 kHz) 2 mV/Pa +/- 3 dB <BR>
 +
Nominal impedance: 200 ohms <BR>
 +
Min. terminating impedance: 200 ohms <BR>
 +
Dimensions in mm: 215 x 46 x 49 <BR>
 +
Weight: approx. 385 g</p></td>
 +
  </tr>
 +
  <tr>
 +
    <td width="194" valign="top">87A COND </td>
 +
    <td width="669">The '''Shure Beta 87A''' is a premium quality supercardioid hand-held electret condenser vocal microphone with exceptionally smooth frequency response and high sound pressure level capability. Used for professional sound reinforcement, broadcasting, and studio recording applications, the Beta 87A combines superb performance with the ruggedness needed for touring and field production.
 +
<BR><BR>
 +
The Beta 87A features a controlled low-frequency roll-off that compensates for proximity effect and prevents the “boomy” sound often associated with close pick-up. The characteristic Shure presence rise brightens the upper midrange. The tight supercardioid pattern, with null points at approximately 125 degrees, provides maximum isolation from other vocalists or instruments while offering minimal off-axis coloration. The Beta 87A operates on phantom power.
 +
<BR><BR>
 +
Polar Pattern: Supercardioid
 +
<BR><BR>
 +
Output Impedance: Rated at 150 ohms (100 ohms actual +/- 20%)
 +
Recommended minimum load impedance: 800 ohms
 +
<BR><BR>
 +
Sensitivity (at 1,000 Hz)
 +
Open Circuit Voltage -52.5 dBV/Pa (2 mV)
 +
(1 Pa = 94 dB SPL)
 +
<BR>
 +
Clipping Level (at 1,000 Hz)
 +
1000 ohm Load: -6 dBV (0.5 V)
 +
<BR>
 +
Maximum SPL (at 1,000 Hz)
 +
140.5 dB (0.25% THD, 1000 ohm load)
 +
<BR>
 +
Self-Noise
 +
(equivalent sound pressure level; measured with true rms voltmeter)
 +
23.5 dB typical, A-weighted
 +
25.5 dB typical, weighted per DIN 45 405
 +
<BR>
 +
Dynamic Range
 +
117 dB (maximum SPL to A-weighted noise level)
 +
<BR>
 +
Signal-to-Noise Ratio
 +
70.5 dB at 94 dB SPL (IEC 651)
 +
(S/N ratio is difference between 94 dB SPL and equivalent SPL of self-noise A-weighted.)
 +
<BR>
 +
Power Phantom Supply Requirement: 11 to 52 Vdc, positive at both pins 2 and 3
 +
Current Drain: 1.0 to 1.2 mA
 +
<BR>
 +
Connector Three-pin (XLR) professional audio
 +
<BR>
 +
Case: Aluminum construction with blue metallic finish, and hardened steel grille with nickel satin chrome plating
 +
<BR>
 +
Net Weight: 207 grams (7.6 oz)
 +
</td>
 +
  </tr>
 +
  <tr>
 +
    <td width="194" valign="top">U87 COND </td>
 +
    <td width="669">Over 50,000 '''Neumann U87''' users can't be wrong, this microphone is the professional  standard and sets the mark by which all others are measured. The U 87 will  celebrate its 40th birthday in 2007 and is still going strong. <BR>
 +
<BR>
 +
The U 87  is probably the best-known and most widely used Neumann studio microphone. It is  equipped with a large dual-diaphragm capsule with 3 directional patterns:  omnidirectional, cardioid, and figure-8. These are selectable with a switch  below the headgrille. A 10 dB attenuation switch, located on the rear, enables  the microphone to handle sound pressure levels up to 127 dB without distortion.  Furthermore, the low frequency response can be reduced to compensate for  proximity effect. <BR>
 +
<BR>
 +
Features: <BR>
 +
Variable large diaphragm microphone <BR>
 +
Pressure-gradient transducer with double membrane capsule <BR>
 +
The  studio microphone classic <BR>
 +
3 directional characteristics: omni, cardioid,  figure-8 <BR>
 +
Switchable low frequency roll-off <BR>
 +
Switchable 10 dB  pre-attenuation <BR>
 +
Ideal as main and as support microphone in the most  differing recording situations <BR>
 +
<BR>
 +
Applications <BR>
 +
The U 87 Ai condenser  microphone is a large diaphragm microphone with 3 polar patterns and a unique  frequency and transient response characteristic.</td>
 +
  </tr>
 +
  <tr>
 +
    <td width="194" valign="top">E609 DYN </td>
 +
    <td width="669"><p>'''Sennheiser e609 Silver''' </p>
 +
    <p>The e609 Silver is based on the legendary MD 409 microphone. Able to withstand  high SPLs without distorting, the e609 Silver's flat-profile capsule allows  extremely close miking of guitar cabinets and precise drum miking, particularly  toms. The e609 Silver's super-cardioid design improves isolation while its  increased output and wider frequency response improves performance. Its sound  inlet basket, made of refined steel, is distinguished by a unique silver address  side. <BR>
 +
<BR>
 +
Features: <BR>
 +
Metal construction -- rugged and reliable <BR>
 +
Super-cardioid pick-up pattern provides isolation from other on-stage  signals <BR>
 +
Hum compensating coil reduces electrical interference <BR>
 +
Neodynum ferrous magnet with boron keeps mic stable regardless of  climate </p>
 +
<p><BR>
 +
Technical Info <BR>
 +
Pick-up pattern: Super-cardioid <BR>
 +
Frequency  response: 40 - 18,000 Hz <BR>
 +
Sensitivity: 1.5 mV/Pa at 1 kHz, nominal <BR>
 +
Nominal impedance: 350 Ohms <BR>
 +
Minimum terminating impedance: 1 k <BR>
 +
Dimensions in inches: 2.17 x 1.34 x 5.28 <BR>
 +
Weight: 6.43oz <BR>
 +
Contact Pressure: 2.5 N <BR>
 +
Weight (without cable): 9.2 oz</p></td>
 +
  </tr>
 +
  <tr>
 +
    <td width="194" valign="top">RE16 DYN <br>
 +
    <td width="669">'''Electro-Voice Model RE16 DYN''' <BR>
 +
Description
 +
The Electro-Voice Model RE16 is a Variable-D® dynamic supercardioid micro­phone designed for the most exacting professional use. It is like the RE15, except that it uses a unique blast filter. The blast filter, an integral part of the RE16, permits hand-held and outdoor use without “P-popping” or excessive wind noise.
 +
<BR><BR>
 +
Utilizing the Variable-D® design, the RE16 features a directional characteristic independent of frequency. The result is a microphone that generates little off-axis coloration while providing the greatest rejection of unwanted sounds. A super-cardioid, the RE16 provides its greatest rejection at 150 degrees off axis. Typical cardioids provide greatest rejection in the horizontal plane when the microphone is tilted In its most natural position –30 degrees from horizontal as on a boom or floor stand.
 +
<BR><BR>
 +
An easily operated “bass-tilt” switch corrects spectrum balance for boom use and other longer reach situations. A “hum-buck” coil and screw-machined steel outer casing provide 25 dB of hum rejection. Hum pickup level is –125 dBm (re: .001 gauss field).
 +
<BR><BR>
 +
Using the mechanical nesting concept of design, by means of which the internal transducer parts are nested one within another, the RE16 transducer is a nearly solid mechanical structure that is highly resistant to damage from mechanical shock. The Memraflex grille screen resists deformation. The exclusive non-metallic Electro-Voice Acoustalloy diaphragm is virtually unaffected by extremes of atmospheric conditions. A carefully designed steel outer case provides additional mechanical protection. Finish is non-reflecting fawn beige micomatte.
 +
<BR><BR>
 +
Technical Info <BR>
 +
Pick-up pattern: Dynamic<BR>
 +
Frequency  response: 80 - 15,000 Hz <BR>
 +
Sensitivity: 1.4 mV/Pa<BR>
 +
Nominal impedance: 150 Ohms <BR>
 +
Dimensions in inches: 7.38 x 1.78 x 0.75<BR>
 +
Weight: 8 oz<BR>
  
{| border="1" cellpadding="20" cellspacing="0" colspan="2" !
+
</td>
!Axe-Fx [[Mic]] type !Description |- |Rat Fuzz |ProCo Rat |}
+
  </tr>
 +
<tr>
 +
<td width="194" valign="top">R121 Cond<br>
 +
<td width="669">'''Royer Labs R-121 Ribbon Microphone''' <br>
 +
Like many of the best loved classic ribbon mics, the R-121 has a figure-8 pattern, sensitivity in the dynamic mic range, and a warm, realistic tone and flat frequency response. But that’s where the similarities end. By using advanced materials and a blend of cutting edge and old-school hand-build construction techniques, the R-121 is a far more versatile and user-friendly ribbon mic that can stand up to the most demanding tasks, including live stage use. It’s built solid enough for us to give it a lifetime warranty. The R-121 redefined ribbon microphones so thoroughly that Recording Magazine wrote "…the Royer R-121 is destined to become one of the classic microphones of the 21st century".
  
 +
Acoustic Operating Principle: Electrodynamic pressure gradient
 +
Polar Pattern: Figure-8
 +
Generating Element: 2.5-micron aluminum ribbon
 +
Magnets: Rare Earth Neodymium
 +
Frequency Response: 30 -15,000 Hz +/- 3dB
 +
Sensitivity: -50 dBv Re. 1v/pa
 +
Output Impedance: 300 Ohms @ 1K (nominal)
 +
Rated Load Impedance: >1500 Ohms @ 300 Ohms
 +
Maximum SPL: >135dB @ 20 Hz
 +
</tr>
  
 +
<tr>
 +
<td width="194" valign="top">D112 DYN<br>
 +
<td width="669">'''AKG D112 Large Diaphragm Microphone''' <br>
 +
This microphone was developed for clean kick drum and bass guitar performance with a powerful, punchy sound.
  
67 COND
+
The microphone shall be a dynamic type with a cardioid
57 DYN
+
pickup pattern with response from 20 Hz - 20 kHz (+/- 10 dB),
58 DYN
+
40 Hz - 17 kHz (+/- 3 dB). Sensitivity shall be no less than
421 DYN
+
1.8 mV/Pa, and the maximum operating level for 1 and 3% THD
87A COND
+
shall be virtually unmeasurable.
U87 COND
+
Absolutely free of distortion even at high sound pressure levels, very low diaphragm resonance, a relatively narrow-band rising high frequency response at 4 kHz, and an extremely robust construction are the outstanding features of this microphone.
E609 DYN
+
Technical Info
RE16 DYN
+
Frequency Range: 20 Hz to 17 kHz
 +
Polar Pattern: Cardioid
 +
Sensitivity: 1.8 mV/Pa (-55 dBV)
 +
Impedance: 210 ohms
 +
</tr>
 +
 
 +
  <tr>
 +
    <td width="194">67 COND</td>
 +
    <td width="669">'''Neumann U67''' <br><p>
 +
The microphone capsule of the U 67 microphone is a pressure-gradient device. It is composed of two identical cardioid systems arranged back to back. By switching of the polarizing voltage these two cardioid patterns can also be combined as to produce the three directional characteristics cardioid, omni-directional, and figure-8. Selection of these patterns is accomplished by a switch located at the front of the microphone directly beneath the wire cage. The symbol of the characteristic selected appears in a window directly above the switch. Two additional switches are located at the rear of the microphone. One switch provides for a sensitivity reduction of appr. 10 dB ahead of the amplifier section permitting transmission of the highest sound pressure levels without danger of overloading the amplifier. The second switch produces a roll-off at the low frequency end beginning at 200 cps. This permits compensation of the normally occurring low frequency rise when a pressure - gradient microphone is addressed at close range. This position further serves to suppress low frequency mechanical interference. These two switches like wise have windows in which their position is indicated. When the sensitivity reduction is effective, the window shows "-10 dB", and when the low frequencies are attenuated, the window shows a horizontal line with its left end bent downward. (These symbols are described as viewed when the microphone is on a stand with its connector end facing the floor.)
 +
A special circuit within the amplifier distinctly attenuated all frequencies below 30 cps, while those above 40 cps are reproduced linearly. The microphone amplifier's response may be extended to below 20 cps flat by opening the jumper "S-2" in the amplifier itself.
 +
 
 +
</p>
 +
<td>
 +
  </tr>
 +
 
 +
</table>

Latest revision as of 07:17, 21 June 2010

The following mic models are available in the Axe-Fx. You can also find a list on the Fractal Audio website.

Axe-FX Mic Type Description
None (**This is now the default since v. 4.00) Disables mic post processing
57 DYN

What can you say about the Shure SM57 It is a tool found in the workbench of every sound engineer, both for live and studio applications. There's simply no question: it's a "must-have" mic.


The SM57 is a cardiod (unidirectional) dynamic microphone with a contoured frequency response of 40 to 15,000 Hz, perfect for clean reproduction of vocals and instruments. But the SM57 is most renowned in the music industry as the standard microphone of choice for snare drums and guitar amplifiers. Go to any stage or studio and you're likely to find SM57s pointing at the amps and snare.

By the way, the '57 has been proudly standing on the podium of the US President for over 30 years, so you can add patriotism to its outstanding attributes! This mic is also known to take a beating and come back for more, so tell your roadie Rocco to have a ball! Its outstanding performance, legendary reliability, and diversity of application make this "workhorse" the choice of performers, producers, and sound engineers the world over.


Technical Info
Type: Dynamic
Frequency Response: 40 to 15,000 Hz (see Figure 2)
Polar Pattern: Unidirectional (cardioid), rotationally symmetrical about
microphone axis, uniform with frequency 3-pin professional audio connector (male XLR type)
Case: Dark gray, enamel-painted, die-cast steel with a polycarbonate
grille and a stainless steel screen.
Dimensions: 32 x 157 x 23mm (1-1/4 x 6-3/16 x 29/32 in.)
Swivel Adapter: Positive-action, break-resistant, adjustable through 180&#65533;,
with standard 5/8 in.-27 thread
Net Weight (without cable): 284 g (10 oz.)
Furnished Accessories: Swivel Adapter, Storage Bag

58 DYN The Shure SM58® unidirectional (cardioid) dynamic vocal microphone is designed for professional vocal use in live performance, sound reinforcement,

and studio recording. It has a tailored vocal response for a sound which is a world standard for singing or speech. A highly effective, built-in spherical filter minimizes wind and breath "pop" noise. A cardioid pickup pattern isolates the main sound source while minimizing unwanted background noise.

Rugged construction, a proven shock-mount system, and a steel mesh grille ensure that even with rough handling, the SM58 will perform consistently, outdoors or indoors.

Type: Dynamic (moving coil)
Frequency Response: 50 to 15,000 Hz
Polar Pattern: Unidirectional (cardioid), rotationally symmetrical about microphone axis, uniform with frequency
Sensitivity (at 1,000 Hz Open Circuit Voltage): -54.5 dBV/Pa (1.85 mV) 1 Pa = 94 dB SPL
Impedance: Rated impedance is 150 ohms (300 ohms actual) for connection to microphone inputs rated low impedance
Polarity: Positive pressure on diaphragm produces positive voltage on pin 2 with respect to pin 3
Connector: Three-pin professional audio connector (male XLR type)
Case: Dark gray, enamel-painted, die cast metal; matte-finished, silver, spherical steel mesh grille
Net Weight: 298 grams (10.5 oz)

421 DYN

The Sennheiser MD 421 is one of the most recognized microphones in the world. Its excellent sound qualities enable it to cope with the most diverse recording conditions and broadcasting applications. The 5-position bass control enhances its "all-round" qualities.

Features
Rugged professional microphone
5-position bass roll-off switch
Effective feedback rejection
Clear sound reproduction
Easy handling due to pronounced directivity

Includes microphone clamp for 3/8 in. thread


Technical Info
Pick-up pattern: cardioid
Frequency response: 30 - 17,000 Hz
Sensitivity: (free field, no load) (1 kHz) 2 mV/Pa +/- 3 dB
Nominal impedance: 200 ohms
Min. terminating impedance: 200 ohms
Dimensions in mm: 215 x 46 x 49
Weight: approx. 385 g

87A COND The Shure Beta 87A is a premium quality supercardioid hand-held electret condenser vocal microphone with exceptionally smooth frequency response and high sound pressure level capability. Used for professional sound reinforcement, broadcasting, and studio recording applications, the Beta 87A combines superb performance with the ruggedness needed for touring and field production.



The Beta 87A features a controlled low-frequency roll-off that compensates for proximity effect and prevents the “boomy” sound often associated with close pick-up. The characteristic Shure presence rise brightens the upper midrange. The tight supercardioid pattern, with null points at approximately 125 degrees, provides maximum isolation from other vocalists or instruments while offering minimal off-axis coloration. The Beta 87A operates on phantom power.

Polar Pattern: Supercardioid

Output Impedance: Rated at 150 ohms (100 ohms actual +/- 20%) Recommended minimum load impedance: 800 ohms

Sensitivity (at 1,000 Hz) Open Circuit Voltage -52.5 dBV/Pa (2 mV) (1 Pa = 94 dB SPL)
Clipping Level (at 1,000 Hz) 1000 ohm Load: -6 dBV (0.5 V)
Maximum SPL (at 1,000 Hz) 140.5 dB (0.25% THD, 1000 ohm load)
Self-Noise (equivalent sound pressure level; measured with true rms voltmeter) 23.5 dB typical, A-weighted 25.5 dB typical, weighted per DIN 45 405
Dynamic Range 117 dB (maximum SPL to A-weighted noise level)
Signal-to-Noise Ratio 70.5 dB at 94 dB SPL (IEC 651) (S/N ratio is difference between 94 dB SPL and equivalent SPL of self-noise A-weighted.)
Power Phantom Supply Requirement: 11 to 52 Vdc, positive at both pins 2 and 3 Current Drain: 1.0 to 1.2 mA
Connector Three-pin (XLR) professional audio
Case: Aluminum construction with blue metallic finish, and hardened steel grille with nickel satin chrome plating
Net Weight: 207 grams (7.6 oz)

U87 COND Over 50,000 Neumann U87 users can't be wrong, this microphone is the professional standard and sets the mark by which all others are measured. The U 87 will celebrate its 40th birthday in 2007 and is still going strong.


The U 87 is probably the best-known and most widely used Neumann studio microphone. It is equipped with a large dual-diaphragm capsule with 3 directional patterns: omnidirectional, cardioid, and figure-8. These are selectable with a switch below the headgrille. A 10 dB attenuation switch, located on the rear, enables the microphone to handle sound pressure levels up to 127 dB without distortion. Furthermore, the low frequency response can be reduced to compensate for proximity effect.

Features:
Variable large diaphragm microphone
Pressure-gradient transducer with double membrane capsule
The studio microphone classic
3 directional characteristics: omni, cardioid, figure-8
Switchable low frequency roll-off
Switchable 10 dB pre-attenuation
Ideal as main and as support microphone in the most differing recording situations

Applications

The U 87 Ai condenser microphone is a large diaphragm microphone with 3 polar patterns and a unique frequency and transient response characteristic.
E609 DYN

Sennheiser e609 Silver

The e609 Silver is based on the legendary MD 409 microphone. Able to withstand high SPLs without distorting, the e609 Silver's flat-profile capsule allows extremely close miking of guitar cabinets and precise drum miking, particularly toms. The e609 Silver's super-cardioid design improves isolation while its increased output and wider frequency response improves performance. Its sound inlet basket, made of refined steel, is distinguished by a unique silver address side.

Features:
Metal construction -- rugged and reliable
Super-cardioid pick-up pattern provides isolation from other on-stage signals
Hum compensating coil reduces electrical interference
Neodynum ferrous magnet with boron keeps mic stable regardless of climate


Technical Info
Pick-up pattern: Super-cardioid
Frequency response: 40 - 18,000 Hz
Sensitivity: 1.5 mV/Pa at 1 kHz, nominal
Nominal impedance: 350 Ohms
Minimum terminating impedance: 1 k
Dimensions in inches: 2.17 x 1.34 x 5.28
Weight: 6.43oz
Contact Pressure: 2.5 N
Weight (without cable): 9.2 oz

RE16 DYN
Electro-Voice Model RE16 DYN

Description The Electro-Voice Model RE16 is a Variable-D® dynamic supercardioid micro­phone designed for the most exacting professional use. It is like the RE15, except that it uses a unique blast filter. The blast filter, an integral part of the RE16, permits hand-held and outdoor use without “P-popping” or excessive wind noise.

Utilizing the Variable-D® design, the RE16 features a directional characteristic independent of frequency. The result is a microphone that generates little off-axis coloration while providing the greatest rejection of unwanted sounds. A super-cardioid, the RE16 provides its greatest rejection at 150 degrees off axis. Typical cardioids provide greatest rejection in the horizontal plane when the microphone is tilted In its most natural position –30 degrees from horizontal as on a boom or floor stand.

An easily operated “bass-tilt” switch corrects spectrum balance for boom use and other longer reach situations. A “hum-buck” coil and screw-machined steel outer casing provide 25 dB of hum rejection. Hum pickup level is –125 dBm (re: .001 gauss field).

Using the mechanical nesting concept of design, by means of which the internal transducer parts are nested one within another, the RE16 transducer is a nearly solid mechanical structure that is highly resistant to damage from mechanical shock. The Memraflex grille screen resists deformation. The exclusive non-metallic Electro-Voice Acoustalloy diaphragm is virtually unaffected by extremes of atmospheric conditions. A carefully designed steel outer case provides additional mechanical protection. Finish is non-reflecting fawn beige micomatte.

Technical Info
Pick-up pattern: Dynamic
Frequency response: 80 - 15,000 Hz
Sensitivity: 1.4 mV/Pa
Nominal impedance: 150 Ohms
Dimensions in inches: 7.38 x 1.78 x 0.75
Weight: 8 oz

R121 Cond
Royer Labs R-121 Ribbon Microphone

Like many of the best loved classic ribbon mics, the R-121 has a figure-8 pattern, sensitivity in the dynamic mic range, and a warm, realistic tone and flat frequency response. But that’s where the similarities end. By using advanced materials and a blend of cutting edge and old-school hand-build construction techniques, the R-121 is a far more versatile and user-friendly ribbon mic that can stand up to the most demanding tasks, including live stage use. It’s built solid enough for us to give it a lifetime warranty. The R-121 redefined ribbon microphones so thoroughly that Recording Magazine wrote "…the Royer R-121 is destined to become one of the classic microphones of the 21st century".

Acoustic Operating Principle: Electrodynamic pressure gradient Polar Pattern: Figure-8 Generating Element: 2.5-micron aluminum ribbon Magnets: Rare Earth Neodymium Frequency Response: 30 -15,000 Hz +/- 3dB Sensitivity: -50 dBv Re. 1v/pa Output Impedance: 300 Ohms @ 1K (nominal) Rated Load Impedance: >1500 Ohms @ 300 Ohms Maximum SPL: >135dB @ 20 Hz

D112 DYN
AKG D112 Large Diaphragm Microphone

This microphone was developed for clean kick drum and bass guitar performance with a powerful, punchy sound.

The microphone shall be a dynamic type with a cardioid pickup pattern with response from 20 Hz - 20 kHz (+/- 10 dB), 40 Hz - 17 kHz (+/- 3 dB). Sensitivity shall be no less than 1.8 mV/Pa, and the maximum operating level for 1 and 3% THD shall be virtually unmeasurable. Absolutely free of distortion even at high sound pressure levels, very low diaphragm resonance, a relatively narrow-band rising high frequency response at 4 kHz, and an extremely robust construction are the outstanding features of this microphone. Technical Info Frequency Range: 20 Hz to 17 kHz Polar Pattern: Cardioid Sensitivity: 1.8 mV/Pa (-55 dBV) Impedance: 210 ohms

67 COND Neumann U67

The microphone capsule of the U 67 microphone is a pressure-gradient device. It is composed of two identical cardioid systems arranged back to back. By switching of the polarizing voltage these two cardioid patterns can also be combined as to produce the three directional characteristics cardioid, omni-directional, and figure-8. Selection of these patterns is accomplished by a switch located at the front of the microphone directly beneath the wire cage. The symbol of the characteristic selected appears in a window directly above the switch. Two additional switches are located at the rear of the microphone. One switch provides for a sensitivity reduction of appr. 10 dB ahead of the amplifier section permitting transmission of the highest sound pressure levels without danger of overloading the amplifier. The second switch produces a roll-off at the low frequency end beginning at 200 cps. This permits compensation of the normally occurring low frequency rise when a pressure - gradient microphone is addressed at close range. This position further serves to suppress low frequency mechanical interference. These two switches like wise have windows in which their position is indicated. When the sensitivity reduction is effective, the window shows "-10 dB", and when the low frequencies are attenuated, the window shows a horizontal line with its left end bent downward. (These symbols are described as viewed when the microphone is on a stand with its connector end facing the floor.) A special circuit within the amplifier distinctly attenuated all frequencies below 30 cps, while those above 40 cps are reproduced linearly. The microphone amplifier's response may be extended to below 20 cps flat by opening the jumper "S-2" in the amplifier itself.