Tuner

From Axe-Fx II Wiki

(Difference between revisions)
Jump to: navigation, search
Line 12: Line 12:
Or configure it manually by assigning the tuner's MIDI CC to a switch on the floor controller.
Or configure it manually by assigning the tuner's MIDI CC to a switch on the floor controller.
-
==Tuner mute==
+
==Muting while tuning==
* The Axe-Fx II's output can be muted when engaging the tuner.
* The Axe-Fx II's output can be muted when engaging the tuner.
* Firmware 6 and later: you have the choice of muting at the Input or Output. Muting at the Input stage allows delay and reverb trails to continue to sound. The Mute parameter is in the Tuner menu.
* Firmware 6 and later: you have the choice of muting at the Input or Output. Muting at the Input stage allows delay and reverb trails to continue to sound. The Mute parameter is in the Tuner menu.
-
==Tuner info on the floor controller's display==
+
==Tuner display on the floor controller==
* Fractal's own MFC-101 and certain controllers, such as from Gordius, Liquid-Foot and RJM, are able to display the Axe-Fx II tuner data on their displays.  
* Fractal's own MFC-101 and certain controllers, such as from Gordius, Liquid-Foot and RJM, are able to display the Axe-Fx II tuner data on their displays.  
*# Enable real-time MIDI SysEx communication on the Axe-Fx II (I/O > MIDI) by setting it to “Tuner” or "All".
*# Enable real-time MIDI SysEx communication on the Axe-Fx II (I/O > MIDI) by setting it to “Tuner” or "All".
*# Connect MIDI OUT on the Axe-Fx II to MIDI IN on the foot controller. Unless you have a controller that allows full bi-directional MIDI communication with the Axe-Fx II via a single 5-pin MIDI-cable (or CAT5 cable with the MFC-101).
*# Connect MIDI OUT on the Axe-Fx II to MIDI IN on the foot controller. Unless you have a controller that allows full bi-directional MIDI communication with the Axe-Fx II via a single 5-pin MIDI-cable (or CAT5 cable with the MFC-101).
 +
 +
==Tuner detects only front input and Input 1 Left==
 +
* The tuner only detects signals at the front input and Input 1 left (rear).
==Strobe display, low strings detection and Magic 8-ball==
==Strobe display, low strings detection and Magic 8-ball==

Revision as of 10:57, 12 July 2012

Contents

Manual

Template:0 Disclaimer

Template:11 Tuner

User contributions

Assigning the tuner to a switch

  1. Scroll to the tuner CC (I/O > Ctrl) and hit Enter.
  2. Click the switch on the floor controller that you want to assign the tuner to.

Or configure it manually by assigning the tuner's MIDI CC to a switch on the floor controller.

Muting while tuning

Tuner display on the floor controller

Tuner detects only front input and Input 1 Left

Strobe display, low strings detection and Magic 8-ball

Display flickering

Personal tools
Namespaces
Variants
Actions
Navigation
Wiki sections
Contributing
Toolbox