Always consult the official Owners Manuals first!
March 2024: all pages have been checked and are up-to-date

Firmware release notes - Axe-Fx III

From Fractal Audio Wiki
Revision as of 05:29, 20 April 2018 by Yek (talk | contribs)
Jump to navigation Jump to search

Icon-firmware.png


1.07

  • Fixed Pitch block not setting number of voices correctly, i.e. Whammy modes should have one voice but two voices were audible.
  • Fixed Input 1 Level Meters not scaled properly when input source is USB.
  • Fixed minor bug in Rotary GUI.
  • Fixed wrong default Output Level value in Return block.
  • Fixed garbage data in SPDIF output buffer if no Output 1 block in layout.
  • Added “Update Rate” parameter to Modifiers. Values are Slow | Medium | Fast. The Update Rate selects the rate at which the modifier updates the target parameter. For most applications a slow rate is sufficient. Under some circumstances a slow rate may cause “zipper noise”. Increasing the rate will reduce the noise at the expense of increased CPU usage.

1.06

  • Added “Solo” ability to Cab block.
  • Added “Plexi 2204” Amp model based on a 1981 JMP 50W Master Volume head.
  • Added modifier capability to Resonator block Chord and Frequency parameters.
  • Fixed Output block buffer stuck when bypassed causing high pitched tone.
  • Fixed Pitch block not initializing correctly on patch change.
  • Fixed Pitch block sometimes getting “stuck” on negative harmony shifts.
  • Fixed distortion on Crystal Echoes pitch type if Direction is set to Reverse and Shift is set to +4.
  • Fixed MIDI message(s) immediately following a PC message being ignored, i.e. Scene Select CC.
  • Fixed some minor GUI bugs.

1.05

  • Fixed MIDI bank select.
  • Fixed Scene Copy function not copying Amp block bypass states.
  • Fixed can’t select Amp type when creating a new preset if the previous preset had the Amp block channel as anything other than ‘A’.
  • Fixed External Controller initial values not being applied and garbage values in any of these controllers that are not assigned.
  • Added ability to route block when Layout is zoomed out.
  • Added Input Source select to ADSR and Envelope in Control block.

1.04

  • Fixed low-cut and high-cut filters not working in Multitap Delay block.
  • Fixed Amp blocks bypass states not being preserved across preset changes.
  • Fixed Tone Match block Smoothing parameter not working.
  • Fixed Quad Tape Delay missing modifier for Motor Speed (formerly labeled Tape Speed).
  • Fixed MIDI CC Channel changes not responding above values of 3.
  • Various GUI enhancements and improvements.

1.03

  • First public firmware release.

1.01/1.02

  • Initial firmware release on the first shipped units.
  • No release notes.